| In 2022 | |||||
| S.No. | Name | Name of Inventors | Title | Grant date | Granted Patent No |
|---|---|---|---|---|---|
| 1 | Dr Sanat Agrawal & Dr Niraj K Mishra (CO-PI) | Dr Sanat Agrawal & Dr Niraj K Mishra (CO-PI) | Desk Mounted Personal Air Filtration Unit | - | Patent Number: 202111024912 |
| 2 | Dr. Vinod Singh Yadav (PI) & Mr. Nishant Kumar (Ph.D Scholar) (CO-PI) | Dr. Vinod Singh Yadav (PI) & Mr. Nishant Kumar (Ph.D Scholar) (CO-PI) | Power driven stair climbing tri-wheeled spider-wheel system | Awarded on 28-12-22 | Patent Number: 202211020472 |
| Detail of externally funded projects by the institute in last five years | ||||
| S.No. | Name of the PI and Co-PI | Details of Project | ||
|---|---|---|---|---|
| 1. | Dr. Vikas Kukshal (Co-PI) |
Title: Development of ultra high precision micron level measurement facility for the measurement of coefficient of thermal expansion for dimensionally stable composite structures Funding Agency: ISRO Total Cost: 20 lakhs |
||
| 2. | Dr. Niraj Kumar Mishra (PI) | Title: Development of domestic cooking stove based on biomass gasification with porous radiant burner Funding Agency: SERB, DST under Core Research Grant Scheme Total Cost: 23.42 lakhs |
||
| 3. | Dr. Pawan Kumar Rakesh (PI) & Dr. Sanat Agarwal (Co-PI) | Title: Fabrication and Testing of Lower Limb Prosthesis for Transtibial Amputee using Biocomposites with Energy Restoring Capability Funding Agency: Indian Institute of Medical Research (ICMR), New Delhi (2022) Total Cost: 27.7 Lakhs |
||
| 4. | Dr. Vinod Singh Yadav (Co-PI) | Title: Solar pump Irrigation Based on PV Cell Technology Funding Agency: TEQIP-III Total Cost: 9.67 Lakhs |
||
| 5. | Dr. Vinod Singh Yadav (Co-PI) | Title: Hybrid Solar Air Heater for Space Heating and Crop Drying Funding Agency: TEQIP-III Total Cost: 12.61 Lakhs |
||
| 6. | Dr. Yogesh Kumar Prajapati (Co-PI) | Title: Development of solar-powered thermoelectric cooler using desiccant dehumidification. Funding Agency: TEQIP-III Total Cost: 10.21 Lakhs |
||
2024
- Dharmesh Yadav, Rahul Goyal and Vinod Singh Yadav, Impact of Temperature/Diurnal Conditions, refueling quantity and prefill volume Behavior on Two-wheeler Refueling Emission, Clean Technologies and Environmental Policy, 2024, DOI: https://doi.org/10.1007/s10098-024-02743-z, ISSN: 1618954X, Springer. SCI-4.2
- Singh, H. N., Agrawal, S., and Modi, Y. K. (2024), “Additively manufactured patient specific implants: A review”, Archive of Mechanical Engineering, Vol. 71(1), March 2024, pp. 109-138. DOI: 10.24425/ame.2024.149635 Scopus, ESCI IF 0.7
- Amit Kumar, Lalta Prasad, Virendra Kumar, “Thermodynamic evaluation of water-cooled photovoltaic thermal system with PCM-based thermal energy storage”. Sadhana Published by Indian Academy of Sciences Spinger. [ ISSN: 0973-7677; SCIE, IF 1.6, 49(19) 2024 Page 1-11
- Hari Om Maurya, Gaurav Kumar, Lalta Prasad and Pranjal Gupta Development and Characterization of Microwave-Processed LLDPE based Sisal/Jute Hybrid Laminates", Journal of Polymer Composites [ ISSN: 1548-0569; SCI IF 5.2 , (accepted) John Wiley & Sons, Inc. New Jersey, United States
- Kumar, V., Yadav, S. K., Kumar, A., Singh, N. K., & Prasad, L. Numerical study on effect of operating pressures on CRKEC-based two-stage ejector. Archives of Thermodynamics, 45(1), 155‒164.2024, MP PAN Publishers, Poland, [ ISSN: 2083-6023; IF 0.9] H-Index, 20, Q3 doi: 10.24425/ather.2024.150448
- Painuly, A., Mishra, N.K. & Zainith, P. Thermo-hydraulic performance evaluation and comparison of SiC-MWCNT and Al2O3-MWCNT Non-Newtonian hybrid nanofluids using a heat exchanger equipped with helically corrugated tubes: an experimental study. J Therm Anal Calorim 149, 3965–3980 (2024). https://doi.org/10.1007/s10973-024-12960-9. SCI, Q1, I.F: 4.4
- Gautam, V., Patnaik, A., Bhat, I., Kukshal, V., Pawar, M. & Kumar, A. (2024). Optimization of physico-mechanical and erosive wear properties of single/multilayer – coated granite filled aluminum alloy composites. International Journal of Materials Research. https://doi.org/10.1515/ijmr-2023-0041.
- Uniyal, Arun, Yogesh K. Prajapati, and Deepak Kumar. "Investigation of thermal performance and charging/discharging characteristics of finned coaxial evacuated tube collector filled with phase change material." Applied Thermal Engineering 238 (2024): 122048 SCI.
- Uniyal, Arun, Deepak Kumar, and Yogesh K. Prajapati. "Melting and Heat Transfer Characteristics of Phase Change Material: A Comparative Study on Wire Mesh Finned Structure and Other Fin Configurations." ASME Journal of Heat and Mass Transfer 146.6 (2024) SCI.
2023
- Kumar R, Rakesh PK, Sreehari D. Investigation on physico-chemical, mechanical and thermal properties of extracted novel pinus roxburghii fiber. Journal of Natural Fibers. 2023 Dec 31;20(1):2157924. SCI I.F-3.507
- Pokhriyal M, Rakesh PK. Processing and characterization of novel Himalayacalamus falconeri fiber-reinforced biodegradable composites. Biomass Conversion and Biorefinery. 2023 Apr 28:1-6. SCI I.F-4.08
- Kumar R, Rakesh PK, Sreehari D, Kumar D, Naik TP. Experimental investigations on material properties of alkali retted Pinus Roxburghii Fiber. Biomass Conversion and Biorefinery. 2023 Apr 27:1-7. SCI I.F-4.08
- Bhatt S, Joshi D, Rakesh PK, Godiyal AK. Advances in additive manufacturing processes and their use for the fabrication of lower limb prosthetic devices. Expert review of medical devices. 2023. SCI I.F-3.439
- Pokhriyal M, Rakesh PK, Rangappa SM, Siengchin S. Effect of alkali treatment on novel natural fiber extracted from Himalayacalamus falconeri culms for polymer composite applications. Biomass Conversion and Biorefinery. 2023 Feb 1:1-7. SCI I.F-4.08
- Kumar D, Kumar A, Subudhi S. Thermal Behavior of Magnetite Nanofluid under Magnetic Field: An Experimental Study and Development of Predictive Model to Predict Thermal Conductivity. Journal of Engineering Thermophysics. 2023 Mar;32(1):100-16. SCI I.F-2.038
- Kumar D, Subudhi S. Buoyancy Induced Convection in Magnetite Nanofluid Filled in Enclosure with Thick Fin under Magnetic Field Produced by a Magnetic Source. Journal of Magnetism and Magnetic Materials. 2023 Apr 13:170725. SCI I.F-3.097
- Singh P, Deepak D, Brar GS. Investigations on the effect of friction crush welding parameters in joining 6061 aluminium alloy to 304 stainless steel. Journal of Mechanical Science and Technology. 2023 Apr;37(4):1999-2008. SCI I.F-1.81
- Sharma H, Singh I, Misra JP. An initial investigation to explore the feasibility of fruit waste fillers for developing sustainable thermoplastic composites. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 2023 :14644207231169121. SCI I.F-2.663
- Kumar A, Zainith P, Sharma A, Mishra NK. Numerical investigation on thermal-hydraulic performance of air preheater equipped with helical inserts. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 2023 Apr;237(8):1968-79. SCI I.F-1.762
- Adgale T, Zainith P, Mishra NK, Sharma A. Heat Transfer and Flow Analysis in a Circular Tube Equipped with Triangular Helical Strip Inserts Under Turbulent Flow Conditions for the Application of Boiler. International Journal of Thermophysics. 2023 Jan;44(1):1-22. SCI I.F- 2.416
- Sharma MP, Gupta PK, Kumar G. Modeling and Simulation of Electrochemical Discharge Machining for Fabrication of Micro-Channel on Glass. Arabian Journal for Science and Engineering. 2023 Mar;48(3):2701-13. SCI I.F-2.807
- Srivastava S, Vishnoi M, Gangadhar MT, Kukshal V. An insight on Powder Mixed Electric Discharge Machining: A state of the art review. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 2023 Apr;237(5):657-90. SCI I.F- 2.759
- Kaloni S, Tiwari P, Singh G. User-defined high impulsive frequency acquisition model for mechanical damage identification. Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics. 2023 Feb 16:14644193231157176. SCI I.F-2.43
- Kumar D, Biswas A, Mandal A, Kumar R. Improvement of Welding Performance on Mild Steel by a Hybrid TIG-MAG Welding Technique. International Journal of Steel Structures. 2023 Apr 23:1-2. Scopus
- Singh V, Yadav VS, Barnawi AV, BhuttoJK, Verma R, Singh P, Kumar N, Comparison of different designs of solar air heater with the simple solar heater of having reflecting mirrors, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, https://doi.org/10.1177/09544062231158.SCI I.F-1.762
- Singh V, Yadav VS, Experimental and numerical analysis of slurry pot tester by Response Surface Methodology (RSM) and Computational Fluid Dynamics (CFD), Evergreen - Joint Journal of Novel Carbon Resource Sciences & Green Asia Strategy, 2023. EGREEN-00570- 2023-02. Scopus.
- Bijlwan PP, Prasad L, Sharma A, Kumar S. Taguchi Optimized Sliding Wear Behavior and Hardness of Novel Grewia Optiva /Basalt Fiber Reinforced Hybrid Polyester Composite; Journal of Applied Polymer Science [ISSN: 1097-4628; SCI: IF 3.051] (Accepted)(3 May 2023)
2022
- Sanjeev Kumar, Lalta Prasad, Pramod Prabhakar Bijlwan, Anshul Yadav. Thermogravimetric analysis of lignocellulosic leaf‑based fiber‑reinforced thermosets polymer composites: an overview Journal of Biomass Conversion and Biorefinery https://doi.org/10.1007/s13399-022-03332-0.(7 Oct. 2022) SCI IF 4.050
- L. Prasad, A. Kumar, R. Jaiswal, A. Kumar, V. Kumar, A. Yadav), Mechanical Properties of AA6061T6 and AA6351T6 plates joined by friction stir welding, Journal of Material Science & Engineering Technology., https://doi.org/10.1002/mawe.202100108 2022;53(8); 888-896.(5 August 2022. SCI IF 1.034
- Lalta Prasad, Rahul Bairwan, Anshul Yadav, Anil Kumar, Virendra Kumar &Jerzy Winczek), Evaluation of Physical, Mechanical, and Wear Properties of Jatropha Shell Powder Reinforced Epoxy Glass Fiber Composites, Journal of Natural Fibers, https://doi.org/10.1080/15440478.2022.2054892; (27 Mar 2022) SCI IF 3.507
- Virendra Kumar, Anil Kumar, Surendra Kumar Yadav, Anshul Yadav, Lalta Prasad, Jerzy Winczek, Numerical Analysis on a Constant Rate of Kinetic Energy Change Based a Two-Stage Ejector-Diffuser System, Journal of Mechanical Engineering https://doi.org/10.5545/sv-jme.2021.7538, 68(2022)5, 368-373;(28 March 2022). Scopus
- Ripudam Singh Negi, Lalta Prasad, Anshul Yadav, Jerzy Winczek Physical and Mechanical Properties of Pinecone Scale Fiber/Vigna Mungo Powder Reinforced Polypropylene Based Hybrid Composites. Journal of Natural Fibers, https://doi.org/10.1080/15440478.2022.2025983(20 Jan 2022) 19(15); 11458-11468; SCI IF 3.507
- Singh V., Yadav V. S. Application of Response Surface Methodology (RSM) to optimize solar pump LCOE and Power output. IETE Journal of Research, doi:10.1080/03772063.2022.2069165. 2022, Print ISSN: 0377-2063 Online ISSN: 0974-780X (2.3 SCI)
- Dharmesh Yadav, Rahul Goyal and Vinod Singh Yadav, Automotive evaporative emissions and refueling losses from Indian two wheelers, Materialstoday Proceedings, 2022,https://doi.org/10.1016/j.matpr.2022.04.748. ISSN: 2214-7853. (SCOPUS)
- Singh V., Yadav V. S., Optimizing the performance of solar panel cooling apparatus by application of Response Surface Methodology (RSM). Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2022,https://doi.org/10.1177/09544062221101828 Print ISSN: 0954-4062, Online ISSN: 2041-2983 (1.762 SCI)
- M Pokhriyal, PK Rakesh, Mechanical and microstructural behaviour of NaOH treated Himalayacalamus falconeri fibers as biodegradable reinforcing material in polymer based composites, Materials today Proceedings, Volume 62, Part 2, 2022,
- Sharma, M.P., Gupta, P.K. & Kumar, G. Modeling and Simulation of Electrochemical Discharge Machining for Fabrication of Micro-Channel on Glass. Arab J Sci Eng (2022). https://doi.org/10.1007/s13369-022-06944-w
- Prabhakar Bhandari, Yogesh K. Prajapati, Influences of tip clearance on flow and heat transfer characterstics of open type micro pin fin heat sink, International Journal of Thermal Sciences, Volume 179, 2022, pp.107714.
- Prabhakar Bhandari, Yogesh K. Prajapati,Influence of three dimensionality effects on thermal hydraulic performance for stepped micro pin fin heat sink. Meccanica (2022). https://doi.org/10.1007/s11012-022-01534-4
- Bhoopendra Pandey, Yogesh K. Prajapati, Pratik N. Sheth, CFD analysis of the downdraft gasifier using species-transport and discrete phase model, Fuel (accepted)
2021
- Prabhakar Bhandari, Yogesh K. Prajapati, Fluid flow and heat transfer behavior in distinct array of stepped micro-pin fin heat sink, Journal of Enhanced Heat Transfer, 28(4), 2021, 31-61.
- Prabhakar Bhandari, Yogesh K. Prajapati. Performance of open microchannel heat sink with variable pin fin height, International Journal of Thermal Sciences, 159(2021) 106609.
- Zainith P, Mishra NK, A comparative study on thermal-hydraulic performance of different non-Newtonian nanofluids through an elliptical annulus, Journal of Thermal Science and Engineering Applications, Transaction of ASME, SCI, I.F: 1.54 (https://doi.org/10.1115/1.4050235)
- Dungali Sreehari and Yogesh Kumar Prajapati, "Comparative Analysis of Heat Transfer and Fluid Flow in Circular and Rhombus Pin Fin Heat Sink Using Nanofluid", Journal of Thermal Science and Engineering Applications, 2021; 13:015028. (https://doi.org/10.1115/1.4050416). Impact Factor: 1.544.
- Deepak K, Aditya K., & Sudhakar S. (2021). Magnetic Field Effect on the Buoyancy-Driven Convection and Fluid Motion in Fe3O4/Water Nanofluid Filled Inside an Enclosure with Mutual Orthogonal Heaters. Journal of Thermal Science and Engineering Applications- Transaction of ASME, 13(4): 041021.
- Deepak K, Aditya K., & Sudhakar S. (2021). Effect of Spatially Varying Magnetic Field on the Cooling of an Electronic Component by Natural Convection with Magnetic Nanofluids. Journal of Thermal Science and Engineering Applications-Transaction of ASME, 13(6): 061017.
- Kumar, G., Mishra R.R. & Sharma, A. K. (2021). On Finite Element Analysis of Material Removal Rate in Microwave Drilling of Borosilicate Glass. Materials Today: Proceedings, Elsevier (Scopus Indexed).
- Singh, P., Deepak, D & Brar, G.S. (2021), Optical micrograph and micro-hardness behavior of dissimilar welded joints of aluminum (Al 6061-T6) and stainless steel (SS 304) with friction crush welding, Materials Today: Proceedings, 44 (1): 1000-1004.
- Lalta Prasad, Niteesh Kumar, Anshul Yadav, Anil Kumar, Virendra Kumar and Jerzy Winczek(2021), In Situ Formation of ZrB2 and Its Influence on Wear and Mechanical Properties of ADC12 Alloy Mixed Matrix Composites; Journal of Materials, 2021, 14, 2141. https://doi.org/10.3390/ma14092141; [ISSN: 1996-1944; IF 3.057], MDPI Publication, Switzerland.
- Sanjeev Kumar, Lalta Prasad, Vinay Kumar Patel, Virendra Kumar, Anil Kumar, Anshul Yadav and Jerzy Winczek (2021), Physical and Mechanical Properties of Natural Leaf Fiber-Reinforced Epoxy Polyester Composites, Journal of Polymers, 2021, 13, 1369. https://doi.org/10.3390/polym13091369; [ISSN: 2073-4360; IF 3.426], MDPI Publication, Switzerland.
- Lalta Prasad, Vinod Singh, Raj Vardhan Patel, Anshul Yadav, Virendra Kumar & Jerzy Winczek (2021) Physical and Mechanical Properties of Rambans (Agave) Fiber Reinforced with Polyester Composite Materials Journal of Natural Fibers, https://doi.org/10.1080/15440478.2021.1904481 ; [ISSN: 1544-0478; IF 2.622] Taylor & Francis, USA [UGC list no. 24766] H-Index, 17
- P.P.Bijlwan, L.Prasad, A.Sharma (2021) Recent advancement in the fabrication and characterization of natural fiber reinforced composite: A review Materials Today: Proceedings, [ISSN: 2214-7853] Elsevier, United Kingdom, H index-11
2020
- Anshul Sharma, “Modelling and analysis of functionally graded carbon nano-tube reinforced composite material based energy harvester” Materials Today,: Proceedings, 28: 2021-2025, 2020.
- Hitesh Sharma, Inderdeep Singh, and Joy Prakash Misra. Evaluation of dynamic properties of citrus limetta peel based epoxy composites. Materials Today: Proceedings Volume 27, Part 3, 2020, Pages 2273-2276 (SCOPUS)
- Khundrakpam, N.S., Brar, G.S., & Devi, M.B., (2020) “Optimizing the process parameters of ECM using Taguchi method”, Materials Today: Proceedings, 26(2), 1373-1379. https://doi.org/10.1016/j.matpr.2020.02.278.
- Kumar, G., Sharma, A.K. On processing strategy to minimize defects while drilling borosilicate glass with microwave energy. Int J Adv Manuf Technol 108, 3517–3536 (2020). https://doi.org/10.1007/s00170-020-05563-9 (Impact Factor = 2.6).
- Lalta Prasad, Manish Upreti, Anshul Yadav, Raj Vardhan Patel, Virendra Kumar, Anil Kumar, Optimization of process parameters during WEDM of EN‑42 spring steel SN Applied Sciences, 2020; [ISSN: 2523-3971] Springer Netherland https://link.springer.com/article/10.1007/s42452-020-2650-2.
- Sudhakar T, Das AK. Evolution of Multiphase Lattice Boltzmann Method: A Review. Journal of The Institution of Engineers (India): Series C. 2020 Jul 20:1-9.
- Tiwari P, Upadhyay SH, Advance spectral approach for condition evaluation of rolling element bearings. ISA Transaction, 2020. IF: 4.305
- Farwaha, H. S., Deepak, D. & Brar, G. S. (2020). Mathematical modeling and process parameters optimization of ultrasonic assisted electrochemical magnetic abrasive machining. Journal of Mechanical Science and Technology, 34(12), 5063-5073. https://doi.org/10.1007/s12206-020-1110-7
- Singh, P., Deepak, D., & Brar, G. S., (2020). Comparative evaluation of aluminum and stainless steel dissimilar welded joints. Materials Today: Proceedings, 33(3), 1488-1492. https://doi.org/10.1016/j.matpr.2020.02.682
- Arora, H., Singh, R., & Brar, G. S., (2020). Numerical simulation on residual stresses of stainless steel SS-304 thin welded pipe. Measurement and Control, 53(7-8), 1183-1193. https://doi.org/10.1177/0020294020917173
- Khundrakpam, N. S., Brar, G. S., & Devi, M. B., (2020). Optimizing the process parameters of ECM using Taguchi method. Materials Today: Proceedings, 26(2), 1373-1379. https://doi.org/10.1016/j.matpr.2020.02.278
- Singh, H., Brar, G. S., Kumar, H., & Aggarwal, V., (2020). Characterization and Sustainability of Boron Carbide Reinforced 7075 Aluminum Metal Matrix Composites. Journal of Green Engineering, 10(10), 7857-7868.
- Farwaha, H. S., Deepak, D., Brar, G. S., (2020). Design and performance of ultrasonic assisted magnetic abrasive finishing combined with electrolytic process set up for machining and finishing of 316L stainless steel. Materials Today: Proceedings, 33(3), 1626-1631. https://doi.org/10.1016/j.matpr.2020.06.143
- Arora, H., Singh, R., & Brar, G. S., (2020). On mechanical and morphological investigations of tungsten inert gas welded SS 304 thin pipe joints. Measurement and Control, 53(1-2), 61-72. https://doi.org/10.1177/0020294019885152
- Bhoopendra Pandey, Yogesh K. Prajapati, Pratik N. Sheth, CFD analysis of biomass gasification using downdraft gasifier, Dec. 2020, https://doi.org/10.1016/j.matpr.2020.10.451
- Thippavathini S, Das AK. Passage of a Liquid Taylor Drop through Successive Bends in a Rectangular Channel. Industrial & Engineering Chemistry Research. 2020 Oct 8. https://doi.org/10.1021/acs.iecr.0c03618
- Hitesh Sharma,Inderdeep Singh, Joy Prakash Misra. Effect of particle size on physical, thermal and mechanical behaviour of epoxy composites reinforced with food waste filler. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. September 2020. doi:10.1177/0954406220958434 (SCI) I.F-1.762
- Hitesh Sharma, Joy Prakash Misra, and Inderdeep Singh. "Friction and wear behaviour of epoxy composites reinforced with food waste fillers." Composites Communications 22 (2020): 100436. (SCI) I.F-6.617
- Dhiman, Prajjwal, and Hitesh Sharma "Effect of walnut shell filler on mechanical properties of jute-basalt hybrid epoxy composites." Materials Today: Proceedings (2020).
- Kumar, G., Mishra R.R. & Sharma, A. K. (2020). On defect minimization during microwave drilling of borosilicate glass at 2.45 GHz using flowing dielectric and optimized input power. Journal of Thermal Science and Engineering Applications, ASME (Impact Factor = 1.544).
- Nishant Kumar, Vinod Singh Yadav, Rahul Banerjee, Optimizing emission characteristics of a GDI engine using grey Taguchi methodology, Materials today Proceedings, https://doi.org/10.1016/j.matpr.2020.10.537, & December 2020.
- Jayant Kumar, Vipin Kumar, Inderdeep Singh, and Pawan Kumar Rakesh, Joining behavior of polymeric composites fabricated using agricultural waste as fillers, Journal of Adhesion Science and Technology, https://doi.org/10.1080/01694243.2020.1855909.
- Lalit Ranakoti, Pawan Kumar Rakesh, Physio-mechanical characterisation of tasar silk waste/jute fiber hybrid composites, Composites Communications, https://doi.org/10.1016/j.coco.2020.100526.
- Lalta Prasad, Shiv Kumar, Raj Vardhan Patel, Anshul Yadav, Virendra Kumar and Jerzy Winczek(2020) , Physical and Mechanical Behaviour of Sugarcane Bagasse Fibre-Reinforced Epoxy Bio-Composites, Materials 2020, 13, 5387; doi:10.3390/ma13235387 [ISSN: 1996-1944; IF 3.057] MDPI AG, Switzerland [UGC list no. 24766] H-Index, 98
- Lalta Prasad, Ashish Kumain, Raj Vardhan Patel, Anshul Yadav, and Jerzy Winczek (2020), Physical and Mechanical Behaviour of Hemp and Nettle Fiber-Reinforced Polyester Resin-based Hybrid Composites, Journal of Natural Fibers, https://doi.org/10.1080/15440478.2020.1821284 [ISSN: 1544-0478; IF 2.622] Taylor & Francis, USA [UGC list no. 24766] H-Index, 17
2019
- Farwaha, H. S., Deepak, D., & Brar, G. S., (2019). Process parameter optimization of ultrasonic assisted electrochemical magnetic abrasive finishing of 316L stainless steel. Journal of Physics: Conference Series, 1240, 012041. https://doi.org/10.1088/1742-6596/1240/1/012041
- Singh, R., Singh, I., Kumar, R., & Brar, G. S., (2019). Waste thermosetting polymer and ceramic as reinforcement in thermoplastic matrix for sustainability: Thermomechanical investigations. Journal of Thermoplastic Composite Materials, In Press. https://doi.org/10.1177/0892705719847237
- Arora, H., Singh, R., & Brar, G. S., (2019). Thermal and structural modelling of arc welding processes: A literature review. Measurement and Control, 52(7-8), 955-969. https://doi.org/10.1177/0020294019857747
- Arora, H., Singh, R., & Brar, G. S., (2019). Prediction of temperature distribution and displacement of carbon steel plates by FEM. Materials Today: Proceedings, 18(7), 3380-3386. https://doi.org/10.1016/j.matpr.2019.07.264
- Bhoopendra Pandey, Yogesh K. Prajapati, Pratik N. Sheth, Recent progress in thermochemical techniques to produce hydrogen gas from biomass: A state of the art review, International Journal of Hydrogen Energy, Vol 44 (2019) 25384-25415.
- Chaurasia, Prabhat, Anil Kumar, Anshul Yadav, Praveen Kumar Rai, Virendra Kumar, and Lalta Prasad. "Heat transfer augmentation in automobile radiator using Al2O3–water based nanofluid." SN Applied Sciences 1, no. 3 (2019): 257.
- Dungali Sreehari and Apurbba Kumar Sharma, "On thermal performance of serpentine microchannels", International Journal of Thermal Sciences, 2019; 146: 106067. (https://doi.org/10.1016/j.ijthermalsci.2019.106067). Impact Factor: 3.488.
- Farwaha, H. S., Deepak, D., & Brar, G. S., (2019). Process parameter optimization of ultrasonic assisted electrochemical magnetic abrasive finishing of 316L stainless steel. Journal of Physics: Conference Series, 1240, 012041. https://doi.org/10.1088/1742-6596/1240/1/012041
- Hitesh Sharma, Inderdeep Singh, and Joy Prakash Misra. Mechanical and Thermal Behaviour of Food Waste (Citrus Limetta Peel) Fillers Based Novel Epoxy Composites. Polymers and Polymer Composites, Volume: 27 issue: 9, page(s): 527-535. doi:10.1177/0967391119851012.(SCI). Impact Factor: 1.023.
- Kumar, G. and Sharma, A.K., Role of dielectric fluid and concentrator material in microwave drilling of borosilicate glass. Journal of Manufacturing Processes 33 (2018): 184-193 (Impact factor = 4.2)
- Lalit Ranakoti, Manoj K Gupta, P K Rakesh, Analysis of mechanical and tribological behavior of wood flour filled glass fiber reinforced epoxy composite, Mater. Res. Express 6 (2019) 085327.
- Lalta Prasad, Gaurav Singh, Anshul Yadav, Virendra Kumar, Anil Kumar, Properties of functionally gradient composites reinforced with waste natural fillers Journal Acta Periodica Tehnologica, [ISSN: 1450-7188; Scopus] 1450-7188 (2019) 50, 250-259, Univerzitet u Novom Sadu, Serbia, H-Index, 11
- Lalta Prasad, Aruna Saini, Virendra Kumar, Mechanical Performance of Jute and Basalt Fiber Geo-grid Reinforced Epoxy Hybrid Composite Material, Journal of Natural Fibers, H-Index, 17, DOI: 10.1080/15440478.2019.1645789 (Accepted) [ISSN: 1544-0478; IF 1.252] Taylor & Francis, USA [UGC list no. 24766] H-Index, 17
- M Pokhriyal, L Prasad, PK Rakesh, HP Raturi, Influence of fibre loading on physical and mechanical properties of Himalayan nettle fabric reinforced polyester composite, Materials Today: Proceedings 5 (9), 2018, 16973-16982.
- Manoj Kumar Gupta and Pawan Kumar Rakesh, “Characterization of pine needle ash particulates reinforced surface composite fabricated by friction stir process”, Materials Research Express, 06(4), 2019, 046539.
- Prabhat Chaurasia, Anil Kumar, Anshul Yadav, Praveen Kumar Rai, Virendra Kumar, Lalta Prasad, Heat transfer augmentation in automobile radiator using Al2O3 water based nanofluid, SN Applied Sciences, 2019; 1:257[ISSN: 2523-3971] Springer Netherland
- Ripudaman Singh Negi, Rajendra Singh Bisht, Raj K. Singh, and Lalta Prasad, Physico-Mechanical and Antibacterial Properties of Pine Gum/Epoxy Composites with/without Silver Nanoparticles, Journal of Macromolecular Materials and Engineering, [ISSN: 1439-2054; IF=2.69] 2019, 304, 1800744(1-12) John Wiley & Sons United Kingdom, H-index, 84 ISSN: 14387492
- Sanjeev Kumar, Lalta Prasad, Sandeep Kumar, Vinay Kumar Patel, Physico-mechanical and Taguchi-designed sliding wear properties of Himalayan agave fiber reinforced polyester composite, Journal of Materials Research and Technology, 2019;8(4), 3662-3671, [ISSN: 2238-7854; IF 3.327] Elsevier, Brazil [UGC list no. ] H-Index, 26
- Sandeep Gairola, Somit Gairola, Hitesh Sharma, Pawan Kumar Rakesh, Impact Behavior of Pine Needle Fiber/Pistachio Shell Filler Based Epoxy Composite, Journal of Physics: Conference Series, 1240 (2019) 012096, 1-7.
- Singh, R., Singh, I., Kumar, R., & Brar, G. S., (2019). Waste thermosetting polymer and ceramic as reinforcement in thermoplastic matrix for sustainability: Thermomechanical investigations. Journal of Thermoplastic Composite Materials, In Press. https://doi.org/10.1177/0892705719847237".
- Tiwari P, Upadhyay SH. Degradation assessment of ball bearings utilizing curvilinear component analysis. Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics. 2019 Sep;233(3):714-30. IF: 1.533.
- Tiwari P, Upadhyay SH. Elucidation of ball bearing performance utilizing product functions of vibration signals and locality sensitive discriminant analysis. Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics. 2019 Aug 27:1464419319871816. IF: 1.533.
- Yogesh K. Prajapati. "Influence of fin height on heat transfer and fluid flow characteristics of rectangular microchannel heat sink." International Journal of Heat and Mass Transfer 137 (2019): 1041-1052.
- Dungali Sreehari and Apurbba Kumar Sharma (2019) "Effect of microchannel pattern on fluid flow and heat transfer characteristics", Advances in Computational Methods in Manufacturing, Lecture Notes on Multidisciplinary Industrial Engineering. Springer, Singapore, pp. 877 - 888. DOI https://doi.org/10.1007/978-981-32-9072-3_73
- Dharmesh Yadav, Rahul Goyal and Vinod Singh Yadav, A review of Control Strategies for Automobile Evaporative Emissions Practiced Worldwide, AIP Conference Proceedings 2148, 030024 (2019); https://doi.org/10.1063/1.5123946 Published Online: 03 September 2019.
2018
- Kumar, G. and Sharma, A.K., Role of dielectric fluid and concentrator material in microwave drilling of borosilicate glass. Journal of Manufacturing Processes 33 (2018): 184-193 (Impact factor = 4.2)
- Anuruddh Kumar, Anshul Sharma, Rahul Vaish, Rajeev Kumar, and Satish Chandra Jain, “A numerical study on flexoelectric bistable energy harvester”, Applied Physics A, 124:483, 2018 (SCI).
- Anuruddh Kumar, Anshul Sharma, Rahul Vaish, Rajeev Kumar, and Satish Chandra Jain, “A numerical study on anomalous behavior of piezoelectric response in functionally graded materials”, Journal of Materials Science, 53, 2413-2423, 2018 (SCI).
- Brar, G. S., (2018). Optimization of machining parameters in dry EDM of EN31 steel. IOP Conference Series: Materials Science and Engineering, 330, 012071. https://doi.org/10.1088/1757-899X/330/1/012071
- Dungali Sreehari and Apurbba Kumar Sharma, "On form accuracy and surface roughness in micro-ultrasonic machining of silicon microchannels", Precision Engineering, 2018; 53:300-309. (https://doi.org/10.1016/j.precisioneng.2018.04.014). (SCI, I.F: 2.582)
- Khundrakpam, N. S., Brar, G. S., & Deepak, D. (2018). Genetic algorithm approach for optimizing surface roughness of near dry EDM. IOP Conference Series: Materials Science and Engineering, 376, 012130. https://doi.org/10.1088/1757-899X/376/1/012130
- Khundrakpam, N. S., Brar, G. S., & Deepak, D. (2018). Grey-taguchi optimization of near dry EDM process parameters on the surface roughness. Materials Today: Proceedings, 5(2), 4445-4451. https://doi.org/10.1016/j.matpr.2017.12.013
- Kukshal V, Patnaik A and Bhat IK. Effect of cobalt on microstructure and properties of AlCr1.5CuFeNi2Cox high-entropy alloys. Materials Research Express 2018. DOI 10.1088/2053-1591/aaba5f.
- L. Prasad, R. Khantwal, Study on breaking load of single lap joint using hybrid joining techniques for alloy steel AISI 4140 and mild steel: Taguchi and Neural network approach, Journal of Mechanical Engineering - Strojnícky časopis, 68(1); 2018;51-60 [ISSN: 2450-5471] Slovak University of Technology in Bratislava( Slovak Republic).
- Mishra NK, Muthukumar P, Development and Testing of Energy Efficient and Environment Friendly Porous Radiant Burner Operating on Liquefied Petroleum Gas , Applied Thermal Engineering, 129, 482-489, 2018, (SCI, I.F: 3.77).
- Singh, H., & Brar, G. S. (2018). Characterization and investigation of mechanical properties of composite materials used for leaf spring. Materials Today: Proceedings, 5(2), 5857-5863. https://doi.org/10.1016/j.matpr.2017.12.183
- Sudhakar, T., and Arup Kumar Das. Interface evolution of a liquid Taylor droplet during passage through a sudden contraction in a rectangular channel. Chemical Engineering Science 192 (2018): 993-1010 (SCI, I.F: 3.87).
- Vinod Singh Yadav, Vinoth R and Dharmesh Yadav, Bio-hydrogen production from waste materials: A Review, MATEC Web of Conferences 192, 02020 (2018). https://doi.org/10.1051/matecconf/201819202020.
- Vinod Singh Yadav, Dilip Sharma, and S. L. Soni, Studies On Hydrogen Fuelled Stationary C. I. Engine Operated End-Utility System, International Journal of Renewable Energy Technology, 2017. ISSN 1757-3971.
- Vipin Pachouri and Anshul Sharma, Active Vibration Suppression of Smart Plate Structure with Fractional-Order PID Controller, International Journal of Mechanical and Production Engineering Research and Development, 41-48, 2018.
2017
- Anuruddh Kumar, Anshul Sharma, Rajeev Kumar, and Rahul Vaish, “Finite Element Study on Acoustic Energy Harvesting Using Lead-Free Piezoelectric Ceramics”, Journal of Electronic Materials, 1-12, 2017 (SCI).
- C. K. Susheel, Anshul Sharma, Rajeev Kumar, and Vishal S. Chauhan, “Geometrical nonlinear characteristics of functionally graded structure using functionally graded piezoelectric materials”, Journal of Sandwich Structures & Materials, DOI: 1099636217752114, 2017 (SCI).
- Yogesh K. Prajapati, M. Pathak, Mohd. Kaleem Khan, Bubble Dynamics and Flow Boiling Characteristics in Three Different Microchannel Configurations. International Journal of Thermal Sciences, 112 (2017) 371-382.
- Yogesh K. Prajapati, P. Bhandari, Flow boiling instabilities in microchannels and their promising solutions – A review, Experimental Thermal and Fluid Science 88 (2017) 573-593. http://www.sciencedirect.com/science/article/pii/S0894177717302108
- Yogesh K. Prajapati, M. Pathak, Mohd. Kaleem Khan. Numerical Investigation of Subcooled Flow Boiling in Segmented finned Microchannels, International communications in Heat and Mass Transfer, 86 (2017) 215-221. http://www.sciencedirect.com/science/article/pii/S0735193317301458.
Book/Book Chapters
2021
- Shaurya Bhatt, Anoop Godiyal, Deepak Joshi, Pawan Kumar Rakesh, Design Analysis and Fatigue Life Prediction of an Indigenously Developed Affordable Knee Prosthesis, Advances in Engineering Design, 2021. ISBN 978-981-334-018-3.
- Sharanjit Singh, Pawan Kumar Rakesh, Influence of Parameters on Powder Mixed Electric Discharge Machining of EN-31 Tool Steel, Advances in Engineering Design, 2021. ISBN 978-981-334-018-3.
- Vidyanand Kumar, Manjeet Kharub, Rajesh Kumar, Pawan Kumar Rakesh, Process Parameters Optimization of Wire EDM on AISI 304 Using the Taguchi Method, Advances in Engineering Design, 2021. ISBN 978-981-334-018-3.
- Gaurav Richhariya, TK Dora, Naveen Singhal, Mayur Rai, Yash Goyal, Preeti Rathi, Yash Gupta, Praman Singh, PP Kundu, Kishori Lal, Pawan Kumar Rakesh, Ultra-Lightweight Cenospheres Cement for Lost Circulation Control with Improved Curing and Reduced Shrinkage, Advances in Engineering Design, 2021. ISBN 978-981-334-018-3.
- Manoj Kumar Gupta, Brijesh Gangil, Lalit Ranakoti, Pawan Kumar Rakesh, Vinay Kumar Patel, Effects of Tool Pin Profiles on Mechanical Properties of Al/TiB2 Surface Composite Fabricated by Friction Stir Process, Advances in Engineering Design, 2021. ISBN 978-981-334-018-3
- Lalit Ranakoti, Brijesh Gangil, Pawan Kumar Rakesh, Nikita Agrawal, Synthesis and utilization of biodegradable polymers, Biobased Composites: Processing, Characterization, Properties, and Applications, John Wiley & Sons, https://doi.org/10.1002/9781119641803.ch12, 2021.
- Randheer Singh, Vikas Kukshal and Vinod Singh Yadav, Mathematical Modelling, Design and Simulation of a Bipedal Walker, Smart Innovation, Systems and Technologies book series (SIST, volume 206); Modeling, Simulation and Optimization pp 531-544. Print ISBN978-981-15-9828-9, Online ISBN978-981-15-9829-6, and Publisher Name: Springer, Singapore, First Online: 18 March 2021
- Singh, R., Kukshal, V., & Yadav, V. S. A Review on Forward and Inverse Kinematics of Classical Serial Manipulators. In Advances in Engineering Design (pp. 417-428). Springer, Singapore, 2021.
- Kumar G., Sreehari D., Mishra R.R., Yadav V., & Sharma A.K. (2021). Investigation on Microwave Joining of Mild Steel Plates at 2.45 GHz and Joint Characterization. In Advances in Engineering Design (pp. 127-136) Springer, Singapore.
- Mishra R.R., Alam P., Yadav J., Kumar G., & Sharma A.K. (2021). Characterization of SiC-Reinforced AZ91 Magnesium Alloy Composites Produced Using In situ Microwave Casting. In Advances in Engineering Design (pp. 23-30). Springer, Singapore.
- Chaudhary S.K., Sharma H., & Kumar G. (2021). Moisture and Flammability Behaviour of flax Fibre and Natural Fillers-Based Hybrid Epoxy Composites. In Advances in Engineering Design (pp. 385-392). Springer, Singapore
- Akshay Gaur, Dungali Sreehari , Lalta Prasad (2021) "Experimental Investigations on Natural Fiber Composite with and without Chemical Treatment" Current Advances in Mechanical Engineering. Lecture Notes in Mechanical Engineering. Springer, Singapore. pp. 797-806. DOI https://doi.org/10.1007/978-981-33-4795-3_73
- Devi S., Yogesh K. Prajapati, Yadav V.S. (2021) Analysis of Mechanical Behavior of Sandwich Panels. In: Rakesh P.K., Sharma A.K., Singh I. (eds) Advances in Engineering Design. Lecture Notes in Mechanical Engineering. Springer, Singapore. pp 499-508 https://doi.org/10.1007/978-981-33-4018-3_47
- Rana, J. and Agrawal, S. (2021), “Physical Modelling of Terrain Using Different File Formats: A Review”. In: Rakesh P.K., Sharma A.K., Singh I. (eds), Advances in Engineering Design: Lecture Notes in Mechanical Engineering, Springer, Singapore, Feb 2021, pp. 311-319, Available at: https://link.springer.com/chapter/10.1007/978-981-33-4018-3_29 DOI: https://doi.org/10.1007/978-981-33-4018-3_29
2020
- Brar, G.S., Khundrakpam, N.S., and Deepak, D., Formulating Empirical Model of MRR of Near-Dry EDM (in Advances in Unconventional Machining and Composites, Lecture Notes on Multidisciplinary Industrial Engineering), Springer, ISBN 978-981-32-9470-7, 2020, pp. 141-148.
- Gairola, Sandeep, Somit Gairola, and Hitesh Sharma. "Environment Effect on Impact Strength of Pistachio Shell Filler-Based Epoxy Composites." Advances in Applied Mechanical Engineering. Springer, Singapore, 2020. 801-808.
- Kukshal, V., Patnaik, A. and Singh, S., 2020. Augmented Technology for Safety and Maintenance in Industry 4.0. In Applications and Challenges of Maintenance and Safety Engineering in Industry 4.0 (pp. 134-141). IGI Global.
- Kukshal, V., Patnaik A and Bhat IK . “The Corrosion and Thermal Behavior of AlCr1.5CuNi2FeCox High Entropy Alloys”, In High Entropy Alloys, DOI: 10.1201/9780367374426-9, 2020.
- Hybrid EDM with Three-Phase Dielectric Medium (in Non-Conventional Hybrid Machining Processes, Theory and Practice) pp. 21-36, CRC Press (Taylor and Francis Group) ISBN - 978-0-42-902916-5, 2020.
- Anju Verma, Apurba Mandal and Dungali Sreehari (2020) "Damage and Failure Analysis of Short Carbon Fiber Reinforced Epoxy Composite Pipe Using FEA", Advances in Applied Mechanical Engineering, Lecture Notes in Mechanical Engineering. Springer, Singapore, pp. 313 - 320. DOI https://doi.org/10.1007/978-981-15-1201-8_36
- Gaurav Verma, Anshul Sharma and Yogesh K. Prajapati, “A Numerical Study to Investigate the Modal Analyses of Cracked Airplane Wing (NACA2415)”, Advances in Applied Mechanical Engineering, Springer, pp. 405, 2020.
- Chauhan S, Yadav P, Tiwari P, Upadhyay SH, Mishra NK, Performance prediction of rolling element bearing with utilization of support vector regression, Reliability, Safety and Hazard Assessment for Risk-Based Technologies, Springer Singapore 2020.
- Prabhakar Z, Mishra NK, Heat Transfer Enhancement of Al2O3-Based Nanofluid in a Shell and Helical Coil Heat Exchanger, Advances in Applied Mechanical Engineering, Springer Singapore 2020.
- Bhandari P., Prajapati Y.K. (2020) Numerical Analysis of Different Arrangement of Square Pin-Fin Microchannel Heat Sink. In: Biswal B., Sarkar B., Mahanta P. (eds) Advances in Mechanical Engineering. Lecture Notes in Mechanical Engineering.Springer, Singapore, Print ISBN 978-981-15-0123-4 https://link.springer.com/chapter/10.1007/978-981-15-0124-1_79
2019
- Singh, R., Singh, I., Kumar, R., and Brar, G.S., Recycling of Thermosetting Waste as Reinforcement along with Ceramic Particles in Thermoplastic Matrix for Machining Applications (in Reference Module in Materials Science and Materials Engineering), Elsevier, ISBN: 978-0-12-803581-8, 2019.
- Kumar M, Kumar G, Kukshal V. On Finite Element Analysis of Melting of Metallic Powders Using Microwave Energy at 2.45 GHz. In Advances in Computational Methods in Manufacturing 2019 (pp. 703-717). Springer, Singapore.
- Kukshal, V., Sharma A, Kiragi VR, Patnaik A, Patnaik TK. Erosive Wear Behaviour of Carbon Fiber/Silicon Nitride Polymer Composite for Automotive Application. In Automotive Tribology 2019 (pp. 117-129). Springer, Singapore. Sharma A, Bhojak V, Kukshal V, Biswas SK, Patnaik A, Patnaik TK. M
- Kumar B., Mer K.K.S., Prasad L. (2019) Dry Sliding Wear Behaviour of Aluminium Metal Matrix-Based Functionally Graded Materials Reinforced with Alumina Particles. Trends in Materials Engineering. Lecture Notes on Multidisciplinary Industrial Engineering. Springer, Singapore, pp 1-11, https://doi.org/10.1007/978-981-13-9016-6_1 (Online ISBN 978-981-13-9016-6)
- Kumar, G., & Sharma, A. K. (2019). Analysis on Thermal Characteristics of Micro-Drilled Glass Using Microwave Energy at 2.45 GHz. In Advances in Computational Methods in Manufacturing (pp. 557-568). Springer, Singapore
- Hitesh Sharma, Ujendra Kumar Komal, Inderdeep Singh, Joy Prakash Misra, Pawan Kumar Rakesh; Introduction to Green Composites. In: Rakesh P., Singh I. (eds) Processing of Green Composites. Materials Horizons: From Nature to Nanomaterials. Springer, Singapore.(2019) https://doi.org/10.1007/978-981-13-6019-0_1; ISBN: 978-981-13-6018-3
2018
- Arora, H., Singh, R., and Brar, G.S. Finite Element Simulation of Weld-Induced Residual Stress in GTA Welded Thin Cylinders (in Reference Module in Materials Science and Materials Engineering), Elsevier, ISBN - 978-0-12-803581-8, 2018
- Mittal, G., Singh, R., and Brar, G.S. Investigations for Performance Analysis of Ceramic Composites for Bearing Applications (in Reference Module in Materials Science and Materials Engineering), Elsevier, ISBN - 978-0-12-803581-8, 2018.
- H. P. Raturi, Lalta Prasad, M. Pokhriyal and A. Kumar, Study on Wear Behavior of Al-Based Hybrid Metal Matrix Composites Reinforced with Al2O3/SiC Particles, Innovative Design, Analysis and Development Practices in Aerospace and Automotive Engineering (I-DAD 2018), Vol.-1, Lecture Notes in Mechanical Engineering, pp17-25, https://doi.org/10.1007/978- 981-13-2697-4_2 (Online ISBN 978-981-13-2697-4)
- Lalta Prasad,Lalit Mohan, Himanshu Prasad Raturi and Virendra Kumar, A Comparative Study on Mechanical and Dry Sliding Wear Behaviour of Al 7075- T6 Welded Joints Fabricated by FSW, TIG and MIG, Innovative Design, Analysis and Development Practices in Aerospace and Automotive Engineering (I-DAD 2018), Vol.-2Lecture Notes in Mechanical Engineering, pp 499-506, https://doi.org/10.1007/978-981-13-2718-6_48
- L Ranakoti, MK Gupta, PK Rakesh, Silk and silk-based composites: opportunities and challenges, Processing of Green Composites, 91-106, 2018, Springer, ISBN 978-981-13-6019-0.
- Mishra NK, Muthukumar P, Panigrahy S, A review on clean combustion within porous media, Air Pollution and Control, Springer Nature Singapore 2018.